Heat Pump & Electric Heating Installation in Toronto

Upgrade to Efficient Electric Heating

Electric heating systems and heat pumps keep your home comfortable all year, efficiently, quietly, and without fossil fuels. Whether you are adding a heat pump, upgrading baseboard heaters, or replacing an old electric water heater, we will make sure your electrical system is ready to handle it safely and efficiently.

At Symmetric Electric Ltd., we install, upgrade, and wire all types of electric heating equipment across Toronto and the GTA. Every installation is done to Ontario Electrical Code standards, inspected by the ESA, and backed by our $5 million liability insurance partrnered with your HVAC professionals.

When to Upgrade or Add Electric Heating

Electric heating systems draw significant power, so your panel, breakers, and wiring need to be ready for the load. If you are switching from gas to electric, or adding new heating zones, it is worth checking your capacity first.

You may need an electrical upgrade if:

You’re installing a new heat pump, electric furnace, or baseboard heaters
You’re replacing a gas water heater with an electric or tankless model
You’ve added an EV charger, hot tub, or other large electrical loads
Your panel is older, full, or showing signs of corrosion
Your home still uses fuses instead of breakers

We will inspect your existing system and calculate the demand so your heating runs safely and efficiently.
If needed, we can upgrade your service or add a sub-panel for the new load.

Heat Pump & Electric Heating Options

We install and upgrade all types of electric heating systems for homes, condos, and commercial spaces.
Whether you are adding a single-zone heat pump or replacing your whole system, we will design the wiring, circuits, and protection to match your load and layout.

Heat Pumps

High-efficiency heat pumps provide both heating and cooling through one system. We install single-zone ductless units, multi-zone setups, and cold-climate systems designed for Toronto winters.

Electric Baseboard Heaters

A simple, reliable heating option that’s perfect for additions, basements, or rooms without ducts. We handle proper circuit sizing, thermostats, and placement for even heating.

In-Floor & Radiant Heating

Radiant heating offers quiet, efficient comfort. We install floor heating systems for bathrooms, kitchens, or basements, with dedicated circuits and smart thermostat control.

Electric Water Heaters & Boilers

We connect tank and tankless water heaters, electric boilers, and combination systems with the right wiring, breaker protection, and GFCI safety where required.

Garage & Outdoor Heaters

We wire ceiling-mount and wall-mount electric heaters for garages, shops, and outdoor areas, with weatherproof wiring and disconnect switches for safety.

Every heating system we install is sized, wired, and inspected for safe operation. From the panel to the thermostat, we make sure your new system runs efficiently and meets Ontario Electrical Code standards.

Not sure which system is right for your space?
Tap the call button below or request a free quote, and we will help you choose the best electric heating setup for your home or business.

Our Heating Installation Process

Every heating installation starts with proper planning. We confirm your system requirements, wiring, and panel capacity to make sure everything runs safely and efficiently from day one.

Assessment & Planning

We inspect your existing panel, wiring, and electrical capacity to confirm what your new heating system needs. If you are switching from gas to electric, we will calculate load demand and design a safe upgrade plan.

Permits & Coordination

We handle all required ESA permits, inspections, and coordination with your HVAC or plumbing contractor if needed.

Professional Installation

We wire, connect, and label all circuits with precision. Every connection is torqued to spec, properly grounded, and protected by the right breaker type for your system.

Testing, Inspection & Cleanup

Once installation is complete, we test all circuits, confirm thermostat control, and verify breaker protection. We handle ESA inspections and clean the workspace before we leave.

Have questions about your heat pump or electric heating setup? Tap the call button below or request a free quote, and we will help you plan it safely and efficiently.

Why Homeowners & Businesses Trust Us

Licensed and Insured

We’re a fully licensed Electrical Contractor (ECRA/ESA #7017720) with $5 million liability coverage and full WSIB protection. Your project is always backed by qualified professionals who take safety seriously.

Warranty & Peace of Mind

All of our work comes with a one-year warranty on parts and labour. We stand behind every installation and service call we complete.

19+ Years Experience

We know Toronto homes and businesses. From downtown condos and storefronts to older neighbourhood wiring and commercial panels. We work with Toronto Hydro, ESA inspectors, and local suppliers every day.

Clean & Organized Work

We treat your property with respect. That means drop sheets, vacuums, tidy wiring, and no mess left behind. When the job is done, everything looks as clean as it is safe.

All-in-One Service

From load calculations and panel upgrades to energy management systems, permits, and final inspection, we handle the coordination at every step.

Upgrade to Safe, Efficient Electric Heating

Make sure your home or business is ready for the future with reliable, efficient electric heating. From heat pumps to radiant floors, we’ll handle the wiring, permits, and inspection so you can enjoy comfort without worry.

When you hire Symmetric Electric Ltd., you are getting licensed, insured workmanship backed by experience and attention to detail.

Common Questions About Appliance & Fixture Installation

Do I need an electrician to install a heat pump or electric heater?

Yes. Most heat pumps, electric furnaces, and baseboard heaters require dedicated circuits and high-current wiring. A licensed electrician ensures the connections are sized correctly and meet Ontario Electrical Code standards for safety and performance.

Can you work with my HVAC contractor?

Absolutely. We regularly coordinate with HVAC installers and plumbing contractors to handle the electrical side of your heat pump or electric heating project. We make sure the wiring, breaker protection, and disconnects are installed before their team finishes setup.

Will my electrical panel handle a new heat pump?

That depends on your existing load. Heat pumps can draw significant current, especially when paired with backup electric heat. We will perform a load calculation and confirm whether your panel can handle the new demand or if a service upgrade is recommended.

Do I need a dedicated circuit for electric heating?

Yes. Electric heaters, baseboards, and heat pumps must be on dedicated circuits with properly rated breakers and wiring. This prevents overload and ensures each system operates safely and efficiently.

What size breaker does a heat pump or heater need?

Breaker size depends on the unit’s amperage rating and voltage. Common heat pump systems require 20A to 40A breakers on 240V circuits. We size breakers and wire according to manufacturer specs and code requirements.

Do I need a permit or ESA inspection for my heating equipment?

Yes, most new heating installations require an ESA permit and inspection. We take care of all documentation and scheduling so you receive a Certificate of Inspection once the work is approved.

How much does electric heating installation cost?

It varies depending on system size, wiring distance, and panel capacity. Simple baseboard installations start around $300–$500, while full heat pump connections can range higher. We provide a clear, itemized quote before any work begins.

Can you upgrade my service or panel if needed?

Yes. We install 200A service upgrades, new panels, or sub-panels if your system requires more capacity. We also coordinate with Toronto Hydro and the ESA to handle all permits and inspections.

Still Have Questions?

We will be happy to help you plan your heating installation safely and efficiently.

Call or text us for answers.