Appliance and Fixture Installation in Toronto and the GTA

Professional Installation for Home Appliances, Fixtures, and Upgrades

It’s best to keep your home safe, efficient, and up to code with licensed electrical installations. Including everything from kitchen and bathroom fixtures to new appliances and workshop tools, Symmetric Electric Ltd. ensures every connection is always secure, inspected, and built to last.

Here, our team handles everything from circuit checks and wiring upgrades to ESA-approved installations for new appliances and fixtures.

When to Call a Licensed Electrician

Installing a new appliance or fixture might look simple, but even small wiring mistakes can cause overheating or tripped breakers. In the worst cases, they can create a hidden fire hazard. Hiring a licensed electrician ensures your wiring, breakers, and connections are all safe, grounded, and meet current Ontario Electrical Code standards.

Call us when you're:

Installing a new appliance that needs its own circuit
Upgrading ceiling fans, chandeliers, or pendant lighting
Adding outdoor fixtures, outlets, or smart switches
Renovating your kitchen, basement, or laundry room
Upgrading outlets to GFCI or tamper-resistant types

If a device or appliance connects to power, it should be installed safely and inspected properly.
We will make sure everything runs smoothly, looks clean, and passes inspection the first time.

Appliance & Fixture Services We Offer

We safely install all types of household and commercial fixtures and appliances. Whether you are upgrading your kitchen, setting up a new laundry room, or adding smart lighting, we will always make sure everything is connected correctly, labelled permanently, and passes ESA inspection.

Some examples of equipment we are familiar with:

Appliances

Built-in ovens, cooktops, and range hoods
Dishwashers, washing machines, and dryers
Microwaves and under-cabinet appliances
Electric water heaters and tankless systems
Heat pump and on-demand water heaters
Dedicated 120V or 240V appliance circuits

Fixtures & Devices

Ceiling fans, chandeliers, and pendant lights
Pot lights and accent lighting
Smart dimmers, switches, and motion sensors
Tamper-resistant and USB outlets
Vanity, mirror, and sconce lighting
Outdoor fixtures, soffit lights, and outlets
Smart home hubs and connected controls

Comfort & Heating

Electric baseboards and radiant heaters
Heated towel racks and floor heating circuits
Heat pump water heaters
Electric water heaters
Garage or outdoor heaters
Outdoor kitchen or patio power
Appliance relocation wiring for remodels

Specialty Equipment

Pottery kilns and specialty heating equipment
Sump pumps and dehumidifiers
Air compressors and dust collectors
Table saws, welders, and shop tools
CNC routers and woodworking machines
Dedicated 240V circuits and disconnects

Do you need help planning a new appliance, workshop tool, or lighting upgrade?
Call (416) 474-6904 or request a free quote.

We will confirm the right wiring, breaker size, and protection for your setup, and get it done safely the first time.

How We Get the Job Done Right

Every job starts with a plan. We take the time to check your system, confirm the right circuit sizes, and make sure everything we install is done safely, neatly, and to code.

Assessment & Planning

We inspect your existing wiring and panel to confirm capacity, breaker space, and circuit size. If extra load is needed, we will recommend the safest upgrade path.

Permits & Coordination

We handle all required ESA permits and schedule inspections when needed. You will receive full documentation of compliance once the work is approved.

Professional Installation

We install and connect your appliances, fixtures, or equipment with clean wiring, secure terminations, and proper labelling. All work is done to Ontario Electrical Code standards by licensed electricians.

Testing, Inspection & Cleanup

Before we leave, we test every connection and verify GFCI or AFCI protection where required. We handle ESA permits and inspections when applicable, clean the area, and make sure everything is ready to use.

Not sure where to start?
Tap the call button below, and we’ll talk through your project and figure out exactly what you need.

Why Homeowners & Businesses Trust Us

Licensed and Insured

Symmetric Electric is a fully licensed Electrical Contractor (ECRA/ESA #7017720) with $5 million liability coverage and full WSIB protection. Your project is always backed by qualified professionals who take safety seriously.

Warranty & Peace of Mind

All of our work comes with a one-year warranty on parts and labour. Symmetric Electric stands behind every installation and service call we complete for your value and peace of mind.

19+ Years Experience

We know Toronto homes and businesses. From downtown condos and storefronts to older neighbourhood wiring and commercial panels, we work with Toronto Hydro, ESA inspectors, and local suppliers every day.

Clean & Organized Work

Symmetric Electric treats your property with respect. That means drop sheets, vacuums, tidy wiring, and no mess left behind. When the job is done, everything looks as clean as it is safe.

All-in-One Service

Starting from load calculations and panel upgrades, through to energy management systems, permits, and final inspections, Symmetric Electric handles the coordination at every step.

Proudly Licensed, Insured, and ESA-Approved

Every installation we complete is done safely, neatly, and inspected by the ESA whenever it is required.

When you hire Symmetric Electric Ltd., you are getting workmanship that is licensed, insured, and built to last.

Common Questions About Appliance & Fixture Installation

Do I need an electrician to install a new appliance?

Yes, you need an electrician. Appliances such as ovens, dryers, and dishwashers draw high current and must be wired correctly to avoid damage or fire risk to your home or office. A licensed electrician ensures the circuit, breaker, and outlet are rated for the load and meet Ontario Electrical Code requirements for your equipment.

Can you install a ceiling fan or light fixture I purchased myself?

Absolutely. We can safely mount and wire any customer-supplied fixtures or equipment. We check connected junction boxes, wiring condition, and switch or outlet locations to make sure your new fixture works safely and looks great.

Will you handle permits and inspections?

Yes. If the installation requires a permit or ESA inspection, we take care of everything for you including opening the permit and scheduling the inspector and dealing with the paperwork. You’ll receive an ESA Certificate of Inspection once the work is approved.

How much does appliance or fixture installation cost?

Typical installations start around $200–$400 for simple fixtures and can vary depending on wiring access, circuit upgrades, wire size, breaker size, panel type, and many other variables. We will always provide a clear, itemized quote before starting any work.

Do you install smart switches or dimmers?

Yes. We install smart home devices, dimmers, and motion sensors that integrate with Alexa, Google Home, or Apple HomeKit. We’ll confirm compatibility with your wiring and ensure everything functions reliably.

Can you add a new circuit for my appliance or workshop tools?

Yes. We can install dedicated 120V or 240V circuits for appliances, shop tools, or heavy-duty equipment such as welders, kilns, or compressors. If your panel is full, we’ll advise whether a sub-panel or service upgrade is best.

Is my old wiring safe for new appliances?

We’ll inspect your existing wiring and connections before installation. If wiring is outdated, undersized, or aluminum, we can replace or upgrade it to meet current ESA safety standards.

Will you remove the old fixture or appliance?

Yes. We’ll safely disconnect and remove the old fixture or appliance, cap off any unused wiring, and make sure the area is ready for your new installation.

Still Have Questions?

We will be happy to help you plan your next installation safely and correctly.

Call or text us for answers.

Call (416) 474 - 6904